STRESS INTENSITY CALIBRATIONS AND COMPLIANCE FUNCTIONS FOR FRACTURE-TOUGHNESS AND CRACK-PROPAGATION TEST SPECIMENS

被引:10
作者
DUGGAN, TV
PROCTOR, MW
SPENCE, LJ
机构
[1] The authors are all with the Department of Mechanical Engineering, Portsmouth Polytechnic, Portsmouth, PO1 3DJ England, Anglesea Road
关键词
D O I
10.1016/0142-1123(79)90043-4
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Experimental determination of compliance over the approximate range of a/W from 0.3 to 0.7 has been undertaken for compact tension and cantilever beam test specimens. The test data have been processed using a recently proposed analytical procedure, and the results for compliance functions have been compared with some standard results available in the literature. The agreement between the experimental results and the proposed compliance functions equation for compact tension geometry of ASTM E399 is excellent. However, for the cantilever beam specimen, it is demonstrated that the usual Srawley and Brown equation for pure bending may underestimate the compliance function by as much as 14%. © 1979.
引用
收藏
页码:37 / 47
页数:11
相关论文
共 24 条
[1]  
Rooke, Cartwright, Compendium of stress in intensity factors, (1976)
[2]  
Brown, Srawley, Plane strain crack toughness testing of high strength metallic materials, STP, 410, (1966)
[3]  
Wessel, State-of-the-art of the WOL specimen for K<sub>IC</sub> fracture toughness testing, Engng Fracture Mech, 1, 1, pp. 77-103, (1968)
[4]  
Srawley, Gross, Stress intensity factors for bend and compact tension specimens, Engng Fracture Mech, 4, 3, pp. 587-589, (1972)
[5]  
Newman, Stress analysis of the compact specimen including the effects of pin loading, STP, 560, (1974)
[6]  
Wilson, Stress intensity factors for deep cracks in bending and compact tension specimens, Engineering Fracture Mechanics, 2, 2, pp. 169-171, (1970)
[7]  
Orloski, Mechanical compliance measurements of single-edge-notch tension specimens, J Research, 174 C, 1-2, pp. 21-27, (1970)
[8]  
Srawley, Wide range stress intensity factor expressions for ASTM E399 standard fracture toughness specimens, Int J Fracture, 12, pp. 475-476, (1976)
[9]  
Bush, Experimentally determined stress intensity factors for single-edge cracked round bars loaded in bending, Expl Mech, 16, 7, pp. 249-257, (1976)
[10]  
Gross, Srawley, Stress intensity factors for single edge notch specimens in bending or combined and tension by boundary collation of a stress function, NASA Tech Note D-2603, (1965)