STUDY OF MECHANISMS OF ELECTRIC FIELD-INDUCED DNA TRANSFECTION .2. TRANSFECTION BY LOW-AMPLITUDE, LOW-FREQUENCY ALTERNATING ELECTRIC-FIELDS

Electroporation for DNA transfection generally uses short intense electric pulses (direct current of kilovolts per centimeter, microseconds to milliseconds), or intense dc shifted radio-frequency oscillating fields. These methods, while remarkably effective, often cause death of certain cell populations. Previously it was shown that a completely reversible, high ionic permeation state of membranes could be induced by a low-frequency alternating electric field (ac) with a strength one-tenth, or less, of the critical breakdown voltage of the cell membrane (Teissie, J., and T. Y. Tsong. 1981. J. Physiol. (Paris). 77:1043–1053). We report the transfection of E. coli (JM105) by plasmid PUC18 DNA, which carries an ampicillin-resistance gene, using low-amplitude, low-frequency ac fields. E. coli transformants confer the ampicillin resistance and the efficiency of the transfection can be conveniently assayed by counting colonies in a selection medium containing ampicillin. For the range of ac fields employed (peak-to-peak amplitude 50–200 V/cm, frequency 0.1 Hz-1 MHz, duration 1–100 s), 100% of the E. coli survived the electric field treatment. Transfection efficiencies varied with field strength and frequency, and as high as 1 x 10(5)/micrograms DNA was obtained with a 200 V/cm square wave, 1 Hz ac field, 30 s exposure time, when the DNA/cell ratio was 50–75. Control samples gave a background transfection of much less than 10/micrograms DNA. With a square wave ac field, the transfection efficiency showed a frequency window: the optimal frequency was 1 Hz with a 200 V/cm field, and was approximately 0.1 Hz with a 50 V/cm field.(ABSTRACT TRUNCATED AT 250 WORDS) © 1990, The Biophysical Society. All rights reserved.