Mechanical and Chemical Characteristics of Bottom Ash Aggregates Cold-bonded with Fly Ash

被引：4
作者：
Kim, Hyeong-Ki [1 ]
Ha, Kyung-Ae [2 ]
Jang, Jeong-Gook [2 ]
Lee, Haeng-Ki [2 ]
机构：
[1] Chosun Univ, Sch Architecture, Gwangju 501759, South Korea
[2] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Daejeon 305701, South Korea
来源：
JOURNAL OF THE KOREAN CERAMIC SOCIETY | 2014年 / 51卷 / 02期
关键词：
Fly ash; Agglomeration/agglomerates; Cements; Mechanical properties; Chemical properties;
D O I：
10.4191/kcers.2014.51.2.57
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Bottom ash can be used as pelletizing seeds in unsintered artificial lightweight aggregates, so it can be called as 'cold-bonded aggregates'. In the present study, the mechanical and chemical characteristics of bottom ash aggregates cold-bonded with fly ash were investigated. The crushing strength and the water transfer characteristic of the aggregates, which may affect the strength gain of the concrete, were evaluated. Moreover, the degree of hydration and the hydration products of the aggregates were analyzed to verify the chemical stability of the aggregates. Compared to commercialized artificial lightweight aggregates manufactured by sintering process, cold-bonded fly/bottom ash aggregates had similar levels of water transfer characteristics, while having lower strengths. The calcium hydroxide in the aggregates was almost completely consumed after 28 days moist curing.
引用
收藏
页码：57 / 63
页数：7
相关论文
共 50 条
[41]   Recycling of sewage sludge ash in cold-bonded artificial lightweight aggregate for sustainable lightweight concrete [J].
Jiang, Junsong ;
Zhou, Xianliang L. ;
Zheng, Yantao T. ;
Wu, Ping ;
Jiang, Guichuan ;
Jian, Bingxi .
SCIENTIFIC REPORTS, 2025, 15 (01)
[42]   Properties of concrete containing fly ash and bottom ash mixture as fine aggregate [J].
Nanda, Bharadwaj ;
Rout, Sudipta .
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2021, 14 (04) :809-819
[43]   Effect of curing time on the hydration and material properties of cold-bonded high-calcium fly ash–Portland cement lightweight aggregate [J].
Chalermphan Narattha ;
Arnon Chaipanich .
Journal of Thermal Analysis and Calorimetry, 2021, 145 :2277-2286
[44]   Performance of bricks made using fly ash and bottom ash [J].
Naganathan, Sivakumar ;
Mohamed, Almamon Yousef Omer ;
Mustapha, Kamal Nasharuddin .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 96 :576-580
[45]   Cold-pressed fly ash geopolymers: effect of formulation on mechanical and morphological characteristics [J].
Shee-Ween, Ong ;
Cheng-Yong, Heah ;
Yun-Ming, Liew ;
Abdullah, Mohd Mustafa Al Bakri ;
Li Ngee, Ho ;
Chan, Lynette Wei Ling ;
Wan-En, Ooi ;
Jaya, Nur Ain ;
Yong-Sing, Ng .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 :3028-3046
[46]   Effect of mixes made of coal bottom ash and fly ash on the mechanical strength and porosity of Portland cement [J].
Argiz, C. ;
Menendez, E. ;
Sanjuan, M. A. .
MATERIALES DE CONSTRUCCION, 2013, 63 (309) :49-64
[47]   THE INFLUENCE OF CHEMICAL COMPOSITION OF MIXTURE ON THE MECHANICAL PROPERTIES OF FLY ASH CONCRETE [J].
Ondova, Marcela ;
Stevulova, Nadezda ;
Estokova, Adriana ;
Junak, Jozef .
12th International Multidisciplinary Scientific Geoconference, SGEM 2012, Vol. V, 2012, :945-950
[48]   Transforming industrial waste by utilizing fly ash and bottom ash for sustainable clay bricks [J].
Lawanwadeekul, Siwat ;
Chindaprasirt, Prinya ;
Phumiphan, Anujit ;
Srisuwan, Anuwat ;
Phonphuak, Nonthaphong .
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2025,
[49]   Electrical conductivity, physico-chemical and mechanical characteristics of fly ash pozzolanic cement [J].
Heikal, M ;
Helmy, I ;
El-Didamony, H ;
Abd El-Raoof, F .
SILICATES INDUSTRIELS, 2004, 69 (11-12) :93-102
[50]   Glass-ceramic from mixtures of bottom ash and fly ash [J].
Dinh Hieu Vu ;
Wang, Kuen-Sheng ;
Chen, Jung-Hsing ;
Bui Xuan Nam ;
Bui Hoang Bac .
WASTE MANAGEMENT, 2012, 32 (12) :2306-2314
12345