Mechanical and Chemical Characteristics of Bottom Ash Aggregates Cold-bonded with Fly Ash

被引：4
作者：
Kim, Hyeong-Ki [1 ]
Ha, Kyung-Ae [2 ]
Jang, Jeong-Gook [2 ]
Lee, Haeng-Ki [2 ]
机构：
[1] Chosun Univ, Sch Architecture, Gwangju 501759, South Korea
[2] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Daejeon 305701, South Korea
来源：
JOURNAL OF THE KOREAN CERAMIC SOCIETY | 2014年 / 51卷 / 02期
关键词：
Fly ash; Agglomeration/agglomerates; Cements; Mechanical properties; Chemical properties;
D O I：
10.4191/kcers.2014.51.2.57
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Bottom ash can be used as pelletizing seeds in unsintered artificial lightweight aggregates, so it can be called as 'cold-bonded aggregates'. In the present study, the mechanical and chemical characteristics of bottom ash aggregates cold-bonded with fly ash were investigated. The crushing strength and the water transfer characteristic of the aggregates, which may affect the strength gain of the concrete, were evaluated. Moreover, the degree of hydration and the hydration products of the aggregates were analyzed to verify the chemical stability of the aggregates. Compared to commercialized artificial lightweight aggregates manufactured by sintering process, cold-bonded fly/bottom ash aggregates had similar levels of water transfer characteristics, while having lower strengths. The calcium hydroxide in the aggregates was almost completely consumed after 28 days moist curing.
引用
收藏
页码：57 / 63
页数：7
相关论文
共 50 条
[31]   Chemical Examination of Fly Ash and Bottom Ash Derived from Incineration of Hazardous Waste [J].
Kepys, Waldemar ;
Wisla-Walsh, Ewa ;
Matusik, Jakub .
INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY, 2018, (01) :221-233
[32]   On the rheology of using geopolymer for grouting: A comparative study with cement-based grout included fly ash and cold bonded fly ash [J].
Gullu, Hamza ;
Cevik, Abdulkadir ;
Al-Ezzi, Kifayah M. A. ;
Gulsan, M. Eren .
CONSTRUCTION AND BUILDING MATERIALS, 2019, 196 :594-610
[33]   Optimization of the manufacturing process and properties of alkali-activated palm oil fuel ash-based cold-bonded aggregates [J].
Lin, Jiayi ;
Tan, Tee How ;
Yeo, Jerome Song ;
Goh, Yingxin ;
Ling, Tung-Chai ;
Mo, Kim Hung .
JOURNAL OF CLEANER PRODUCTION, 2024, 437
[34]   HYDRAULIC CONDUCTIVITY CHARACTERISTICS OF ROAD BASE MATERIALS BLENDED WITH FLY ASH AND BOTTOM ASH [J].
Dungca, Jonathan R. ;
Galupino, Joenel G. ;
Alday, Jesreel C. ;
Barretto, Maria Angelica F. ;
Bauzon, Matthew Kristoffer G. ;
Tolentino, Angelo N. .
INTERNATIONAL JOURNAL OF GEOMATE, 2018, 14 (44) :121-127
[35]   Synthesis and characteristics of fly ash and bottom ash based geopolymers-A comparative study [J].
ul Haq, Ehsan ;
Padmanabhan, Sanosh Kunjalukkal ;
Licciulli, Antonio .
CERAMICS INTERNATIONAL, 2014, 40 (02) :2965-2971
[36]   Assessment of environmental and chemical properties of coal ashes including fly ash and bottom ash, and coal ash concrete [J].
Rafieizonooz, Mahdi ;
Khankhaje, Elnaz ;
Rezania, Shahabaldin .
JOURNAL OF BUILDING ENGINEERING, 2022, 49
[37]   Identification of design parameters influencing manufacture and properties of cold-bonded pond ash aggregate [J].
Vasugi, V. ;
Ramamurthy, K. .
MATERIALS & DESIGN, 2014, 54 :264-278
[38]   Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete [J].
Gomathi, P. ;
Sivakumar, A. .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 77 :276-287
[39]   Study on mechanical properties of concrete inclusion of high-volume coal bottom ash with the addition of fly ash [J].
Hasim, Abdul Muiz ;
Shahid, Khairul Anuar ;
Ariffin, Nur Farhayu ;
Nasrudin, Nurul Natasha ;
Zaimi, Muhammad Nor Syahrul .
MATERIALS TODAY-PROCEEDINGS, 2022, 51 :1355-1361
[40]   High-volume fly ash Self Consolidating Concrete with coal bottom ash and recycled concrete aggregates: Fresh, mechanical and microstructural properties [J].
Meena, Amardeep ;
Singh, Navdeep ;
Singh, S. P. .
JOURNAL OF BUILDING ENGINEERING, 2023, 63
12345