Mechanical and Chemical Characteristics of Bottom Ash Aggregates Cold-bonded with Fly Ash

被引：4
作者：
Kim, Hyeong-Ki [1 ]
Ha, Kyung-Ae [2 ]
Jang, Jeong-Gook [2 ]
Lee, Haeng-Ki [2 ]
机构：
[1] Chosun Univ, Sch Architecture, Gwangju 501759, South Korea
[2] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Daejeon 305701, South Korea
来源：
JOURNAL OF THE KOREAN CERAMIC SOCIETY | 2014年 / 51卷 / 02期
关键词：
Fly ash; Agglomeration/agglomerates; Cements; Mechanical properties; Chemical properties;
D O I：
10.4191/kcers.2014.51.2.57
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Bottom ash can be used as pelletizing seeds in unsintered artificial lightweight aggregates, so it can be called as 'cold-bonded aggregates'. In the present study, the mechanical and chemical characteristics of bottom ash aggregates cold-bonded with fly ash were investigated. The crushing strength and the water transfer characteristic of the aggregates, which may affect the strength gain of the concrete, were evaluated. Moreover, the degree of hydration and the hydration products of the aggregates were analyzed to verify the chemical stability of the aggregates. Compared to commercialized artificial lightweight aggregates manufactured by sintering process, cold-bonded fly/bottom ash aggregates had similar levels of water transfer characteristics, while having lower strengths. The calcium hydroxide in the aggregates was almost completely consumed after 28 days moist curing.
引用
收藏
页码：57 / 63
页数：7
相关论文
共 50 条
[21]   Use of Coal Bottom Ash and CaO-CaCl2-Activated GGBFS Binder in the Manufacturing of Artificial Fine Aggregates through Cold-Bonded Pelletization [J].
Jeon, Dongho ;
Yum, Woo Sung ;
Song, Haemin ;
Yoon, Seyoon ;
Bae, Younghoon ;
Oh, Jae Eun .
MATERIALS, 2020, 13 (24) :1-17
[22]   Employing cold bonded pelletization to produce lightweight aggregates from incineration fine bottom ash [J].
Tang, P. ;
Florea, M. V. A. ;
Brouwers, H. J. H. .
JOURNAL OF CLEANER PRODUCTION, 2017, 165 :1371-1384
[23]   Physiochemical and leaching characteristics of fly and bottom ash [J].
Singh, Mani Kanwar ;
Kumar, Satish ;
Ratha, Dwarikanath .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2016, 38 (16) :2377-2382
[24]   Developing geopolymer concrete by using cold-bonded fly ash aggregate, nano-silica, and steel fiber [J].
Their, Jumah Musdif ;
Ozakca, Mustafa .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 180 :12-22
[25]   Manufacturing F-Fly Ash Based Geopolymer Mortars Using CFBC Bottom Ash as Fine Aggregates [J].
Li, Qin ;
Chen, Chen ;
Shen, Lifeng ;
Zhai, Jianping .
JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2013, 35 (02) :314-319
[26]   Utilization of Waste Plastic and Fly Ash/Bottom Ash as an Alternative to Natural Aggregates: Strength Properties [J].
D. L. D. G. Peiris ;
R. M. K. M. Rathnayake ;
G. K. P. John ;
Nirma Swaris ;
R. U. Halwatura .
Materials Circular Economy, 2024, 6 (1)
[27]   Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes [J].
Guneyisi, Erhan ;
Gesoglu, Mehmet ;
Ipek, Suleyman .
CONSTRUCTION AND BUILDING MATERIALS, 2013, 47 :358-365
[28]   Rheological and strength performances of cold-bonded geopolymer made from limestone dust and bottom ash for grouting and deep mixing [J].
Gullu, Hamza ;
Al Nuaimi, Maryam M. D. ;
Aytek, Ali .
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2021, 80 (02) :1103-1123
[29]   Reuse of bottom ash and fly ash from mechanical-bed and fluidized-bed municipal incinerators in manufacturing lightweight aggregates [J].
Chuang, Kui-Hao ;
Lu, Chien-Hsing ;
Chen, Jyh-Cherng ;
Wey, Ming-Yen .
CERAMICS INTERNATIONAL, 2018, 44 (11) :12691-12696
[30]   Recycling and valorization of municipal solid waste incineration bottom ash via cold-bonded granulation technology - The role of fiber volume and fiber type [J].
Jin, Hesong ;
Cheng, Lei ;
Liu, Jun ;
Chen, Chaoyun ;
Xing, Feng .
CONSTRUCTION AND BUILDING MATERIALS, 2024, 442
12345