Mechanical and Chemical Characteristics of Bottom Ash Aggregates Cold-bonded with Fly Ash

被引:4
作者
Kim, Hyeong-Ki [1 ]
Ha, Kyung-Ae [2 ]
Jang, Jeong-Gook [2 ]
Lee, Haeng-Ki [2 ]
机构
[1] Chosun Univ, Sch Architecture, Gwangju 501759, South Korea
[2] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Daejeon 305701, South Korea
关键词
Fly ash; Agglomeration/agglomerates; Cements; Mechanical properties; Chemical properties;
D O I
10.4191/kcers.2014.51.2.57
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Bottom ash can be used as pelletizing seeds in unsintered artificial lightweight aggregates, so it can be called as 'cold-bonded aggregates'. In the present study, the mechanical and chemical characteristics of bottom ash aggregates cold-bonded with fly ash were investigated. The crushing strength and the water transfer characteristic of the aggregates, which may affect the strength gain of the concrete, were evaluated. Moreover, the degree of hydration and the hydration products of the aggregates were analyzed to verify the chemical stability of the aggregates. Compared to commercialized artificial lightweight aggregates manufactured by sintering process, cold-bonded fly/bottom ash aggregates had similar levels of water transfer characteristics, while having lower strengths. The calcium hydroxide in the aggregates was almost completely consumed after 28 days moist curing.
引用
收藏
页码:57 / 63
页数:7
相关论文
共 50 条
[11]   Potential of municipal woody biomass waste ash in the production of cold-bonded lightweight aggregates [J].
Lin, Jiayi ;
Mo, Kim Hung ;
Goh, Yingxin ;
Onn, Chiu Chuen .
JOURNAL OF BUILDING ENGINEERING, 2023, 63
[12]   Cold-Bonded Fly Ash Lightweight Aggregate Concretes with Low Thermal Transmittance: Review [J].
Barabanshchikov, Yurii ;
Fedorenko, Iyliia ;
Kostyrya, Sergey ;
Usanova, Kseniia .
INTERNATIONAL SCIENTIFIC CONFERENCE ENERGY MANAGEMENT OF MUNICIPAL FACILITIES AND SUSTAINABLE ENERGY TECHNOLOGIES EMMFT 2018, VOL 2, 2019, 983 :858-866
[13]   Valorization of municipal solid waste incineration bottom ash (MSWIBA) into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods [J].
Liu, Jun ;
Li, Zhenlin ;
Zhang, Weizhuo ;
Jin, Hesong ;
Xing, Feng ;
Chen, Chaoyun ;
Tang, Luping ;
Wang, Yanshuai .
SCIENCE OF THE TOTAL ENVIRONMENT, 2022, 843
[14]   Development of self-foaming cold-bonded lightweight aggregates from waste glass powder and incineration bottom ash for lightweight concrete [J].
Bian, Zuwang ;
Huang, Yujie ;
Lu, Jian-Xin ;
Ou, Guangfeng ;
Yang, Shuqing ;
Poon, Chi Sun .
JOURNAL OF CLEANER PRODUCTION, 2023, 428
[15]   Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates [J].
Wongsa, Ampol ;
Zaetang, Yuwadee ;
Sata, Vanchai ;
Chindaprasirt, Prinya .
CONSTRUCTION AND BUILDING MATERIALS, 2016, 111 :637-643
[16]   Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates [J].
Gesoglu, Mehmet ;
Guneyisi, Erhan ;
Alzeebaree, Radhwan ;
Mermerdas, Kasim .
CONSTRUCTION AND BUILDING MATERIALS, 2013, 40 :982-990
[17]   The impact of cold-bonded artificial lightweight aggregates produced by municipal solid waste incineration bottom ash (MSWIBA) replace natural aggregates on the mechanical, microscopic and environmental properties, durability of sustainable concrete [J].
Liu, Jun ;
Li, Zhenlin ;
Zhang, Weizhuo ;
Jin, Hesong ;
Xing, Feng ;
Tang, Luping .
JOURNAL OF CLEANER PRODUCTION, 2022, 337
[18]   Mechanical Behavior of Clay Soil Stabilized with Fly Ash and Bottom Ash [J].
Nugroho, Soewignjo Agus ;
Zulnasari, Azra ;
Fatnanta, Ferry ;
Putra, Andius Dasa .
MAKARA JOURNAL OF TECHNOLOGY, 2022, 26 (01) :1-7
[19]   Physico-mechanical properties of self-compacting concrete containing treated cold-bonded fly ash lightweight aggregates and SiO2 nano-particles [J].
Guneyisi, Ethan ;
Gesoglu, Mehmet ;
Azez, Oday Ali ;
Oz, Hatice Oznur .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 101 :1142-1153
[20]   Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar [J].
Kim, H. K. ;
Ha, K. A. ;
Lee, H. K. .
CONSTRUCTION AND BUILDING MATERIALS, 2016, 126 :1-8