ANALYSIS OF INTERIOR ACOUSTIC FIELDS USING THE FINITE-ELEMENT METHOD AND THE BOUNDARY-ELEMENT METHOD

被引：39

作者：

KOPUZ, S ^{[1
]}

LALOR, N ^{[1
]}

机构：

[1] MIDDLE EAST TECH UNIV,DEPT MECH ENGN,ANKARA 06531,TURKEY

来源：

APPLIED ACOUSTICS | 1995年 / 45卷 / 03期

关键词：

D O I：

10.1016/0003-682X(94)00045-W

中图分类号：

O42 [声学];

学科分类号：

070206 ; 082403 ;

摘要：

For the first part of this study, the finite element method (FEM) and the boundary element method (BEM) are both used to predict the interior acoustic field of a rectangular closed cavity, due to the vibration of one wall. The direct (i.e. inversion of the dynamic stiffness matrix) and modal superposition solution techniques are compared for the FEM, and the collocation and variational techniques are compared for the BEM. It is found that there are no significant differences between the collocation and variational results. Identical results are also obtained from both the direct and modal superposition techniques, provided that sufficient modes are included in the latter case. In order to investigate the influence of the boot (luggage) compartment on the acoustic response of the passenger compartment of a car, a second (smaller) rectangular cavity is joined to the one described above. The acoustic response of the combination is computed by the FEM when the two cavities are separated by different types of partition. It is found that addition of the boot cavity, as well as the characteristics of the partition, have a very marked effect on the main cavity response.

引用

页码：193 / 210

页数：18

共 19 条

[1]

Morse, Feshbach, Methods of Theoretical Physics, (1953)

[2]

Zienkiewicz, The Finite Element Method, (1977)

[3]

Nefske, Wolf, Howell, Structural acoustic finite element analysis of the automobile passenger compartment: a review of current practice, J. Sound Vib., 80, 2, pp. 247-266, (1982)

[4]

Nagy, Dede, Campbell, Borders, Acoustic analysis of a light truck cab, SAE Paper No. 880911, pp. 4.987-4.1001, (1989)

[5]

Chen, Schweikert, Sound radiation from an arbitrary body, The Journal of the Acoustical Society of America, 35, 10, pp. 1626-1632, (1963)

[6]

Bell, Meyer, Zinn, Predicting the acoustics of arbitrarily shaped bodies using an integral approach, AIAA J., 15, 6, pp. 813-820, (1977)

[7]

Brebbia, The Boundary Element Method for Engineers, (1980)

[8]

Brebbia, Ciskowski, Boundary Element Methods in Acoustics, (1991)

[9]

Kipp, Bernhard, Prediction of acoustical behavior in cavities using an indirect boundary element method, J. Vib. Ac. St. Rel. Des., 109, pp. 22-28, (1987)

[10]

Fyfe, Determination of acoustic modal properties from boundary element modelling, Dynamic Engineering, (1988)

← 1 2 →