A STUDY ON TIMING BELT NOISE (HOW TO REDUCE RESONANT NOISE)

被引：13
作者：
KOYAMA, T
WATANABE, K
NAGAI, K
KAGOTANI, M
机构：
[1] Department of Mechanical Engineering, Osaka Institute of Technology, Osaka
[2] Department of Mechanical Engineering, Yamagata University, Yonezawa
[3] Department of Mechanical Engineering, Gunma University, Gunma
[4] Department of Mechanical Engineering, Osaka Sangyo University, Osaka
来源：
JOURNAL OF MECHANICAL DESIGN | 1990年 / 112卷 / 03期
关键词：
D O I：
10.1115/1.2912624
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Two methods to suppress the resonant noise of timing belts are proposed. One method is to vary the belt tension periodically by the use of an eccentric pulley and the other method is to vary the mass density of the belt. It was experimentally confirmed that the resonant noise of timing belts is reduced by about 10 dB by the use of each method. © 1990 by ASME.
引用
收藏
页码：419 / 423
页数：5
相关论文
共 8 条
  • [1] Case R.Y., Timing Belt Drive Engineering Handbook, (1954)
  • [2] Koyama T., Marshek K., Toothed Belt Drive-Past, Present and Future, Mechanism and Machine Theory, 23, 3, (1988)
  • [3] Kubo A., Et al., On the Running Noise of Toothed Belt Drive (1st report, Mechanism of Noise Generation), Bulletin of the Japan Society of Mechanical Engineers, 14, 75, (1971)
  • [4] Kubo A., Et al., On the Running Noise of Toothed Belt Drive (2nd report, Influence of Running Condition and Some Noise Reduction Methods), Bulletin of the Japan Society of Mechanical Engineers, 14, 75, (1971)
  • [5] Kagotani M., Et al., Some Methods to Reduce Noise in Toothed Belt Drives, Bulletin of the Japan Society of Mechanical Engineers, 24, 190, (1981)
  • [6] Koyama T., Et al., Life, Transmission Error and Noise of Toothed Belt Drives for Automobile Engines
  • [7] Koyama T., Et al., Timing Belt Noise: Comparison between Trapezoidal Tooth Profile Belt and Circular Tooth Profile Belt, Transactions of the Japan Society of Mechanical Engineers, 54, 505C, (1988)
  • [8] Watanabe K., Et al., A Study on Timing Belt Noise (Theoretical Analysis for Forced Transverse Vibration of Timing Belt with Parametric Excitation), ASME Journal of Mechanical Design, 112, 3, pp. 424-429, (1990)
1