ANALYSIS OF INHOMOGENEITY OF MECHANICAL-PROPERTIES IN STAINLESS-STEEL RODS AFTER DRAWING

被引：9

作者：

SADOK, L

LUKSZA, J

MAJTA, J

SKOLYSZEWSKI, A

机构：

[1] Akademia Górniczo-Hutnicza, 30-059 Kraków

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1994年 / 45卷 / 1-4期

关键词：

D O I：

10.1016/0924-0136(94)90355-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents the results of investigation of the inhomogeneity of mechanical properties in the 1H18N9T stainless steel rods. Sixteen drawing schedules of reduction ratios varying from 5.5% to 24.4% and die angles varying from 6-degrees to 20-degrees were examined. Local values of R0.2, R(m) and A100 were determined from the tension tests carried on the mini-specimens. Distribution of the HV5 hardness on the transverse and longitudinal cross sections were evaluated. Experimentally found coefficient allows to determine the 0.2% of set stress and tensile strength from the hardness measurements.

引用

页码：293 / 298

页数：6

共 50 条

[31] EFFECT OF MICROALLOYING ELEMENTS ON MECHANICAL-PROPERTIES OF HEAVY SECTION AUSTENITIC STAINLESS-STEEL [J].

KATAOKA, Y .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05) :S497-S497

[32] HIGH-TEMPERATURE MECHANICAL-PROPERTIES OF STAINLESS-STEEL FIBER-REINFORCED CASTABLES [J].

SKROVANEK, SD ;

HERRON, RH .

AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (03) :400-400

[33] MECHANICAL-PROPERTIES OF PHOSPHATE GLASS-CERAMIC-316-L STAINLESS-STEEL COMPOSITES [J].

PERNOT, F ;

ROGIER, R .

JOURNAL OF MATERIALS SCIENCE, 1993, 28 (24) :6676-6682

[34] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF AN ALPHA-PARTICLE IRRADIATED TYPE 316 STAINLESS-STEEL [J].

MIYAHARA, K ;

SAKAMOTO, Y ;

KAYANO, H ;

HOSOI, Y .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (06) :964-966

[35] RECRYSTALLIZATION BEHAVIOR AND MECHANICAL-PROPERTIES OF HIGHLY PURIFIED 18-8 STAINLESS-STEEL [J].

TOMITA, K ;

MITSUJI, H ;

OKITA, T ;

SHIMOMURA, T .

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (10) :B256-B256

[36] INTERACTIVE EFFECTS OF SHOCK LOADING PARAMETERS ON THE SUBSTRUCTURE AND MECHANICAL-PROPERTIES OF NICKEL AND STAINLESS-STEEL [J].

MOIN, E ;

MURR, LE .

MATERIALS SCIENCE AND ENGINEERING, 1979, 37 (03) :249-269

[37] HIGH-TEMPERATURE MECHANICAL-PROPERTIES OF STAINLESS-STEEL FIBER-REINFORCED CASTABLES [J].

SKROVANEK, SD ;

HERRON, RH .

AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (07) :742-745

[38] RECRYSTALLIZATION BEHAVIOR AND MECHANICAL-PROPERTIES OF HIGHLY PURIFIED 18-8 STAINLESS-STEEL [J].

TOMITA, K .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05) :S538-S538

[39] MECHANICAL-PROPERTIES OF OXIDES DISPERSED STAINLESS-STEEL PRODUCED BY SPRAY-DISPERSION METHOD [J].

TAKESHITA, K ;

HASEGAWA, M .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1978, 42 (03) :289-294

[40] IRRADIATION EFFECTS ON MECHANICAL-PROPERTIES OF 18CR-11NI STAINLESS-STEEL [J].

VANDERSCHAAF, B ;

DEVRIES, MI .

ATOMKERNENERGIE, 1977, 29 (02) :91-93

← 1 2 3 4 5 →