ANALYSIS OF INHOMOGENEITY OF MECHANICAL-PROPERTIES IN STAINLESS-STEEL RODS AFTER DRAWING

被引：9

作者：

SADOK, L

LUKSZA, J

MAJTA, J

SKOLYSZEWSKI, A

机构：

[1] Akademia Górniczo-Hutnicza, 30-059 Kraków

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1994年 / 45卷 / 1-4期

关键词：

D O I：

10.1016/0924-0136(94)90355-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents the results of investigation of the inhomogeneity of mechanical properties in the 1H18N9T stainless steel rods. Sixteen drawing schedules of reduction ratios varying from 5.5% to 24.4% and die angles varying from 6-degrees to 20-degrees were examined. Local values of R0.2, R(m) and A100 were determined from the tension tests carried on the mini-specimens. Distribution of the HV5 hardness on the transverse and longitudinal cross sections were evaluated. Experimentally found coefficient allows to determine the 0.2% of set stress and tensile strength from the hardness measurements.

引用

页码：293 / 298

页数：6

共 50 条

[21] MECHANICAL-PROPERTIES OF RAPIDLY SOLIDIFIED TYPE-304 STAINLESS-STEEL [J].

KORTH, GE ;

FLINN, JE .

JOURNAL OF METALS, 1984, 36 (12) :26-26

[22] INFLUENCE OF LIGHT PREFORMING ON MECHANICAL-PROPERTIES OF AUSTENITIC STAINLESS-STEEL SHEET [J].

MULDERS, H ;

SCHMITZ, K .

TECHNISCHE MITTEILUNGEN KRUPP WERKSBERICHTE, 1975, 33 (02) :83-88

[23] IMPROVEMENT OF MECHANICAL-PROPERTIES OF SINTERED COMPOSITE STAINLESS-STEEL BY MEANS OF ROLLING [J].

AZUSHIMA, A ;

UENO, A ;

MIYAGAWA, M .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (10) :1327-1334

[24] MECHANICAL-PROPERTIES OF ISOTHERMALLY AGED HIGH-NITROGEN STAINLESS-STEEL [J].

SIMMONS, JW .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (10) :2579-2595

[25] EFFECT OF VACUUM SINTERING ON THE MECHANICAL-PROPERTIES OF COPPER-ALLOYED STAINLESS-STEEL [J].

TIZIANI, A ;

MOLINARI, A ;

KAZIOR, J ;

STRAFFELINI, G .

POWDER METALLURGY INTERNATIONAL, 1990, 22 (04) :17-19

[26] INFLUENCE OF HELIUM ON HIGH-TEMPERATURE MECHANICAL-PROPERTIES OF AN AUSTENITIC STAINLESS-STEEL [J].

SAGUES, AA ;

SCHROEDER, H ;

KESTERNICH, W ;

ULLMAIER, H .

JOURNAL OF NUCLEAR MATERIALS, 1978, 78 (02) :289-298

[27] THE INFLUENCE OF HYDROGEN ON THE MECHANICAL-PROPERTIES AND STRUCTURE OF A STABLE-304 STAINLESS-STEEL [J].

IYER, KJL .

CANADIAN METALLURGICAL QUARTERLY, 1989, 28 (02) :153-158

[28] CHANGE IN MECHANICAL-PROPERTIES AND MICROSTRUCTURE OF 201 STAINLESS-STEEL WITH INCREASED NITROGEN ALLOYING [J].

RAWERS, JC ;

ASAI, G ;

DUNNING, JS .

JOURNAL OF MATERIALS RESEARCH, 1994, 9 (12) :3160-3169

[29] EFFECTS OF FAST-NEUTRON IRRADIATION ON MECHANICAL-PROPERTIES OF AUSTENITIC STAINLESS-STEEL [J].

DALTON, JH .

JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY, 1978, 79 (02) :27-34

[30] VARIATION OF MECHANICAL-PROPERTIES WITH HEAT-TREATMENT OF 2 PHASE STAINLESS-STEEL [J].

HOSHINO, A ;

KANAO, M ;

NAKANO, K .

TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1978, 20 (06) :346-352

← 1 2 3 4 5 →