ANALYSIS OF INHOMOGENEITY OF MECHANICAL-PROPERTIES IN STAINLESS-STEEL RODS AFTER DRAWING

被引：9

作者：

SADOK, L

LUKSZA, J

MAJTA, J

SKOLYSZEWSKI, A

机构：

[1] Akademia Górniczo-Hutnicza, 30-059 Kraków

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1994年 / 45卷 / 1-4期

关键词：

D O I：

10.1016/0924-0136(94)90355-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents the results of investigation of the inhomogeneity of mechanical properties in the 1H18N9T stainless steel rods. Sixteen drawing schedules of reduction ratios varying from 5.5% to 24.4% and die angles varying from 6-degrees to 20-degrees were examined. Local values of R0.2, R(m) and A100 were determined from the tension tests carried on the mini-specimens. Distribution of the HV5 hardness on the transverse and longitudinal cross sections were evaluated. Experimentally found coefficient allows to determine the 0.2% of set stress and tensile strength from the hardness measurements.

引用

页码：293 / 298

页数：6

共 50 条

[11] MECHANICAL-PROPERTIES OF CONTROLLED-POROSITY 316 STAINLESS-STEEL [J].

MOSSNER, WR .

JOURNAL OF METALS, 1979, 31 (03) :17-20

[12] EFFECT OF DIRECT CASTING ON MECHANICAL-PROPERTIES OF STAINLESS-STEEL POSTS [J].

SORENSEN, JA ;

CAPUTO, AA ;

DAHER, T .

JOURNAL OF DENTAL RESEARCH, 1987, 66 :343-343

[13] EFFECT OF THERMOMECHANICAL TREATMENT ON MECHANICAL-PROPERTIES OF DUPLEX STAINLESS-STEEL [J].

KAMEMURA, Y .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05) :S484-S484

[14] THE EFFECTS OF CREEP ON THE MECHANICAL-PROPERTIES OF TYPE-316 STAINLESS-STEEL [J].

GAN, D .

JOURNAL OF METALS, 1981, 33 (09) :A23-A23

[15] MECHANICAL-PROPERTIES OF SINTERED AUSTENITIC STAINLESS-STEEL - EFFECT OF SILICON ADDITION [J].

SHARON, A ;

ITZHAK, D .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 157 (02) :145-149

[16] MECHANICAL-PROPERTIES AND CORROSION-RESISTANCE OF DUPLEX STAINLESS-STEEL WELDMENT [J].

KOMIZO, YI .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05) :S601-S601

[17] SINTERING MECHANISM OF AUSTENITIC STAINLESS-STEEL AND ITS INFLUENCE ON MECHANICAL-PROPERTIES [J].

KYOGOKU, H ;

SHINOHARA, K ;

SEO, T ;

IMAMURA, T ;

TSUDA, M .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1992, 56 (09) :1072-1077

[18] MECHANICAL-PROPERTIES OF ISOTHERMALLY AGED HIGH-NITROGEN STAINLESS-STEEL [J].

SIMMONS, JW .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (08) :2085-2101

[19] EFFECT OF CREEP EXPOSURE ON MECHANICAL-PROPERTIES OF AISI 304 STAINLESS-STEEL [J].

ETIENNE, CF ;

ZEEDIJK, HB ;

SCHEEPENS, CP .

METALS TECHNOLOGY, 1979, 6 (AUG) :285-290

[20] EFFECT OF ALLOYING ELEMENTS ON THE MECHANICAL-PROPERTIES OF THE STABLE AUSTENITIC STAINLESS-STEEL [J].

OHKUBO, N ;

MIYAKUSU, K ;

UEMATSU, Y ;

KIMURA, H .

ISIJ INTERNATIONAL, 1994, 34 (09) :764-772

← 1 2 3 4 5 →