A MACHINING THEORY FOR PREDICTING CHIP GEOMETRY, CUTTING FORCES ETC FROM WORK MATERIAL PROPERTIES AND CUTTING CONDITIONS

[1] Boothroyd G., 1963, ARCHIVE P I MECH ENG, V177, P789, DOI [10.1243/pime_proc_1963_177_058_02, DOI 10.1243/PIME_PROC_1963_177_058_02, 10.1243%2FPIME_PROC_1963_177_058_02]

[2] TEMPERATURE AND STRAIN-RATE DEPENDENCE OF SHEAR STRENGTH OF MILD STEEL [J]. PHILOSOPHICAL MAGAZINE, 1970, 21 (169) : 63 - +

[3] NON-UNIQUENESS OF MACHINING PROCESS [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1978, 360 (1703) : 587 - 610

[4] Fenton R. G., 1969, P I MECH ENG, V183, P417

[5] Hastings W, 1974, P I MECH ENG, V188, P245, DOI [10.1243/PIME_PROC_1974_188_027_02, DOI 10.1243/PIME_PROC_1974_188_027_02]

[6] HASTINGS WF, 1977, CIRP ANN, V25, P33

[7] KOBAYASHI S, 1962, T AM SOC MECH ENGR B, V84, P71

[8] Kudo H., 1965, INT J MECH SCI, V7, P43

[9] LEE EH, 1951, J APPL MECH-T ASME, V73, P405

[10] LIN GCI, 1972, P I MECH ENG, V186, P813

[1] Boothroyd G., 1963, ARCHIVE P I MECH ENG, V177, P789, DOI [10.1243/pime_proc_1963_177_058_02, DOI 10.1243/PIME_PROC_1963_177_058_02, 10.1243%2FPIME_PROC_1963_177_058_02]

[2] TEMPERATURE AND STRAIN-RATE DEPENDENCE OF SHEAR STRENGTH OF MILD STEEL [J]. PHILOSOPHICAL MAGAZINE, 1970, 21 (169) : 63 - +

[3] NON-UNIQUENESS OF MACHINING PROCESS [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1978, 360 (1703) : 587 - 610

[4] Fenton R. G., 1969, P I MECH ENG, V183, P417

[5] Hastings W, 1974, P I MECH ENG, V188, P245, DOI [10.1243/PIME_PROC_1974_188_027_02, DOI 10.1243/PIME_PROC_1974_188_027_02]

[6] HASTINGS WF, 1977, CIRP ANN, V25, P33

[7] KOBAYASHI S, 1962, T AM SOC MECH ENGR B, V84, P71

[8] Kudo H., 1965, INT J MECH SCI, V7, P43

[9] LEE EH, 1951, J APPL MECH-T ASME, V73, P405

[10] LIN GCI, 1972, P I MECH ENG, V186, P813