FAILURE OF CEMENTED CARBIDE TOOLS IN INTERMITTENT CUTTING

被引：13

作者：

BHATIA, SM

PANDEY, PC

SHAN, HS

机构：

[1] Department of Mechanical and Industrial Engineering, University of Roorkee, Roorkee

来源：

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY | 1979年 / 1卷 / 03期

关键词：

D O I：

10.1016/0141-6359(79)90041-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The nature and mode of cemented carbide tool failure has been examined by considering the effects of thermal and mechanical loads to which a tool is subjected during intermittent cutting. Interrupted cutting tests were performed on a lathe, using a specially designed slotted workpiece fixture and several grades of cemented carbides were used to machine mild steel. Experimental results indicate that the mechanism of tool failure changes with the cutting parameters; these must therefore be carefully chosen to optimise tool performance. © 1979.

引用

页码：148 / 152

页数：5

共 15 条

[1]

Okushima, Hoshi, Thermal cracks in the carbide face milling cutter (2nd Report), Bulletin of JSME, 6, 22, pp. 317-326, (1963)

[2]

Andreev, Thermal state of tool cutting edge in intermittent cutting, Russ Engg J, 54, 8, pp. 56-58, (1974)

[3]

Opitz, Frohlich, Z. VDI, 96, (1954)

[4]

Okushima, Hoshi, Thermal cracks in the carbide face milling cutter (1st Report), Bulletin of JSME, 5, 17, pp. 151-160, (1967)

[5]

Loladze, Nature of brittle failure of cutting tool, Ann., CIRP, 24, 1, pp. 13-26, (1975)

[6]

Niedzwiedzki, Sowinski, Cutting edge cracking of tools, ASTME Paper No 634, (1964)

[7]

Zorev, Machining steel with a carbide tipped tool in interrupted heavy cutting conditions, Russ Engg J, 43, pp. 43-47, (1963)

[8]

Shinozaki, Thermal Cracks of Carbide Face Milling Cutter, Bulletin of JSME, 5, 20, pp. 753-764, (1962)

[9]

Okushima, Hoshi, Internal temperature ditribution of carbide fly cutting tool, Bulletin of JSME, 19, 39, pp. 566-573, (1967)

[10]

Braiden, Dugdale, Failure of carbide tools in intermittent cutting, Proc. of Conf. on Materials for Metal-Cutting, pp. 30-34, (1970)

← 1 2 →