STATISTICAL-METHODS FOR THE CORRELATION OF THE LOW-DENSITY POLYETHYLENE FILM PHYSICAL-MECHANICAL CHARACTERISTICS WITH THE EXTRUSION - BLOWING PLANTS OPERATING PARAMETERS

被引：0

作者：

POSTELNICESCU, P ^{[1
]}

BOLOGA, V ^{[1
]}

DANCIU, E ^{[1
]}

机构：

[1] UNIV POLITEHN BUCURESTI, FAC CHIM IND, BUCHAREST, ROMANIA

来源：

MATERIALE PLASTICE | 1995年 / 32卷 / 02期

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

By processing data of the current industrial production of a Romanian, MEP phi 90 extruder, the equation for correlating the machine field with the serew revolution and nozzle temperature, as well as the physical - mechanical characteristics (i.e stretch resistance, breaking, strength, tear strength and impact resistance) of the foils obtained with the machine flowrate and blowing rate were worked out. These equations are useful in the technological analysis of the: foils extrusion - blowing, since they reflect the interactions between the quantitative and qualitative parameters of the industrial process.

引用

页码：106 / 111

页数：6

共 9 条

[1] Programmed experiment for the correlation of the physical-mechanical characteristics of the low density polyethylene foils with the operating parameters of the extrusion-blowing plants
Danciu, Emil
Postelnicescu, Paula
Bologa, Vasile
Vladescu, Anda
Materiale Plastice, 1988, 25 (02) : 99 - 103
[2] CORRELATION OF THE PROCESSING PARAMETERS AND THE PHYSICAL-MECHANICAL PROPERTIES OF ARTICLES IN EXTRUSION OF POLYETHYLENE
LEITLAND, VV
STRANTSE, RI
SAKAINIS, AI
MECHANICS OF COMPOSITE MATERIALS, 1987, 23 (02) : 239 - 243
[3] THE USE OF MELT STRENGTH OF LOW-DENSITY POLYETHYLENE AS A PROCESSABILITY MEASURE IN FILM BLOWING EXTRUSION
MONTES, SA
RAMIREZ, JL
POLYMER ENGINEERING AND SCIENCE, 1986, 26 (06): : 388 - 392
[4] FOAM EXTRUSION CHARACTERISTICS OF THERMOPLASTIC RESIN WITH FLUOROCARBON BLOWING AGENT .1. LOW-DENSITY POLYETHYLENE FOAM EXTRUSION
HAN, CD
MA, CY
JOURNAL OF APPLIED POLYMER SCIENCE, 1983, 28 (09) : 2961 - 2982
[5] FOAM EXTRUSION CHARACTERISTICS OF THERMOPLASTIC RESIN WITH FLUOROCARBON BLOWING AGENT .3. FOAM SHEET EXTRUSION OF POLYSTYRENE AND LOW-DENSITY POLYETHYLENE
YANG, HH
HAN, CD
JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (08) : 3297 - 3316
[6] Improvement of Processing Parameters by Using Processing Aids During the Linear Low-Density Polyethylene Film Blowing Process
Fatehi, Abbas
Sanjani, Naser Sharifi
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2010, 16 (01): : 78 - 83
[7] The Effect of Bamboo Charcoal on Water Absorption, Contact Angle, and the Physical-Mechanical Properties of Bamboo/Low-Density Polyethylene Composites
Chen, Qi
Zhang, Rong
Wang, Yangao
Wen, Xuwen
Qin, Daochun
BIORESOURCES, 2016, 11 (04): : 9986 - 10001
[8] FOAM EXTRUSION CHARACTERISTICS OF THERMOPLASTIC RESIN WITH FLUOROCARBON BLOWING AGENT. III. FOAM SHEET EXTRUSION OF POLYSTYRENE AND LOW-DENSITY POLYETHYLENE.
Yang, Heng-Huey
Han, Chang Dae
Journal of Applied Polymer Science, 1985, 30 (08): : 3297 - 3316
[9] Influence of the Main Blown Film Extrusion Process Parameters on the Mechanical Properties of a High-Density Polyethylene Hexene Copolymer and Linear Low-Density Polyethylene Butene Copolymer Blend Used for Plastic Bags
Cuesta, Francisco
Camacho, Ana Maria
Rubio, Eva Maria
APPLIED SCIENCES-BASEL, 2023, 13 (22):

← 1 →