MEASUREMENT AND CALCULATION OF THE DYNAMIC OPERATING CHARACTERISTICS OF THE 5 SHOE, TILTING PAD JOURNAL BEARING

被引:45
|
作者
BROCKWELL, K [1 ]
KLEINBUB, D [1 ]
DMOCHOWSKI, W [1 ]
机构
[1] POLISH ACAD SCI, INST FLUID FLOW MACHINERY, PL-00901 WARSAW, POLAND
关键词
D O I
10.1080/10402009008981979
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents results from an experimental and theoretical investigation of the dynamic characteristics of the tilting pad journal bearing. The five shoe bearing, of nominal diameter 76.2 mm and Lid ratio 0.75, has been loaded statically “between pads.” The dynamic characteristics were measured for shaft speeds of 15, 30, 45 and 60 Hz and for loads that ranged between 1.7 and 4.5 kN. The theoretically derived stiffness and damping coefficients were calculated from a model which accounts for both thermal and elastic effects in the bearing. After the inclusion of shaft flexibility in the analysis of the measured dynamic coefficients, correlation between the experimental and theoretical results was found to be satisfactory. © 1990 Taylor & Francis Group, LLC.
引用
收藏
页码:481 / 492
页数:12
相关论文
共 50 条
  • [41] Measurements versus predictions for the static and dynamic characteristics of a four-pad, rocker-pivot, tilting-pad journal bearing
    Tschoepe, David P.
    Childs, Dara W.
    Proceedings of the ASME Turbo Expo, 2013, 7 A
  • [42] Thermohydrodynamic Model of the Tilting-Pad Journal Bearing
    Grigor'ev, B. S.
    Fedorov, A. E.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2019, 48 (03) : 236 - 242
  • [43] HYDRODYNAMIC TILTING PAD JOURNAL BEARING WITH AUTOMATIC CONTROL
    Marcinkevicius, Andrejus Henrikas
    ARCHIVE OF MECHANICAL ENGINEERING, 2010, 57 (04) : 343 - 354
  • [44] MEASUREMENTS VERSUS PREDICTIONS FOR THE STATIC AND DYNAMIC CHARACTERISTICS OF A FOUR-PAD, ROCKER-PIVOT, TILTING-PAD JOURNAL BEARING
    Tschoepe, David P.
    Childs, Dara W.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 7A, 2013,
  • [45] Thermohydrodynamic Model of the Tilting-Pad Journal Bearing
    B. S. Grigor’ev
    A. E. Fedorov
    Journal of Machinery Manufacture and Reliability, 2019, 48 : 236 - 242
  • [46] Automatic regulation of clearance in a tilting pad journal bearing
    Marcinkevicius, A. H.
    MECHANIKA, 2012, (02): : 192 - 195
  • [47] EFFECT OF SCRATCHES ON A TILTING-PAD JOURNAL BEARING
    Chatterton, Steven
    Pennacchi, Paolo
    Vania, Andrea
    Hassini, Mohamed Amine
    Kuczkowiak, Antoine
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 10B, 2020,
  • [48] Influence of pad pivot friction on tilting-pad journal bearing measurements - Part I: Steady operating position
    Wygant, KD
    Flack, RD
    Barrett, LE
    TRIBOLOGY TRANSACTIONS, 1999, 42 (01) : 210 - 215
  • [49] Nested dichotomy method for calculation static and dynamic characteristics of lubricating oil film in tilting pad thrust bearing
    Li X.-Y.
    Zhao Y.
    Chuan Bo Li Xue/Journal of Ship Mechanics, 2019, 23 (02): : 142 - 151
  • [50] Dynamic Analysis of Dual Parallel Spring-Supported Tilting Pad Journal Bearing
    Jin, Yingze
    Wang, Zhicai
    Zhao, Xuefei
    LUBRICANTS, 2025, 13 (03)