FLOW CHARACTERISTICS NEAR THE NOZZLE IN A BUBBLE COLUMN WITH SIMULTANEOUS GAS-LIQUID INJECTION

被引：5
|
作者：
IDOGAWA, K
FUKUDA, T
NAGAISHI, H
MAEKAWA, Y
CHIBA, T
MOROOKA, S
机构：
[1] HOKKAIDO UNIV,MET CHEM RES INST,SAPPORO,HOKKAIDO 060,JAPAN
[2] KYUSHU UNIV,DEPT APPL CHEM,FUKUOKA 812,JAPAN
来源：
KAGAKU KOGAKU RONBUNSHU | 1990年 / 16卷 / 06期
关键词：
Bubble Column; Bubble Size; Bubble Velocity; Coal Liquefaction Reactor; Flow Properties; Gas Holdup; Optical Fiber Probe; Simultaneous Injection Nozzle;
D O I：
10.1252/kakoronbunshu.16.1210
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Gas holdup, bubble rising velocity and bubble size were measured by an opticalfiber probe near a nozzle in a bubble column with simultaneous gas-liquid injection. A jet-like spouting stream was formed near the nozzle, and the height of the jet was not affected by the diameter of the nozzle. Bubbles were formed at the side wall and the top of the jet, and they dispersed radially with increasing axial position. When the axial position was greater than 88 cm from the nozzle, the radial distribution of gas holdup became uniform regardless of axial position. The radial dispersion and the bubble diameter depended on the nozzle diameter, and the effects of simultaneous gas-liquid injection on the bubble formation were similar to those of an increase of pressure. © 1990, The Society of Chemical Engineers, Japan. All rights reserved.
引用
收藏
页码：1210 / 1215
页数：6
相关论文
共 50 条
  • [41] Effect of liquid height on flow characteristics in bubble column using highly viscous liquid
    Bando, Y
    Chaya, M
    Hamano, S
    Yasuda, K
    Nakamura, M
    Osada, K
    Matsui, M
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2003, 36 (05) : 523 - 529
  • [42] Dynamic Characteristics of Bubble Distribution Zone in Gas-Liquid Reactors
    Yuan Naiju
    石油学报(石油加工), 1997, (S1) : 136 - 142
  • [43] Ejector performance in a co-current gas-liquid downflow bubble column
    Kundu, G
    Mukherjee, D
    Mitra, AK
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1997, 75 (05) : 956 - 963
  • [44] Flow characteristics of gas-liquid two phase plunging jet absorber - Gas holdup and bubble penetration depth
    Ide, M
    Uchiyama, H
    Ishikura, T
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 1999, 16 (05) : 698 - 702
  • [45] Effect of some solid properties on gas-liquid mass transfer in a bubble column
    Mena, P.
    Ferreira, A.
    Teixeira, J. A.
    Rocha, F.
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2011, 50 (02) : 181 - 188
  • [46] Prediction of gas-liquid flow in an annular gap bubble column using a bi-dispersed Eulerian model
    Guedon, Gael Raymond
    Besagni, Giorgio
    Inzoli, Fabio
    CHEMICAL ENGINEERING SCIENCE, 2017, 161 : 138 - 150
  • [47] Numerical simulation of the gas-liquid flow in a laboratory scale bubble column Influence of bubble size distribution and non-drag forces
    Diaz, M. Elena
    Iranzo, Alfredo
    Cuadra, Daniel
    Barbero, Ruben
    Montes, Francisco J.
    Galan, Miguel A.
    CHEMICAL ENGINEERING JOURNAL, 2008, 139 (02) : 363 - 379
  • [48] Gas-liquid mass transfer in a slurry bubble column operated at gas hydrate forming conditions
    Hashemi, Shahrzad
    Macchi, Arturo
    Servio, Phillip
    CHEMICAL ENGINEERING SCIENCE, 2009, 64 (16) : 3709 - 3716
  • [49] Detailed experimental studies on gas-liquid bubble flow in bubble columns with and without recycle
    Borchers, O
    Eigenberger, G
    BUBBLY FLOWS: ANALYSIS, MODELLING AND CALCULATION, 2004, : 1 - 10
  • [50] Effects of gas distributor on hydrodynamics in gas-liquid bubble column by visual experiments and CFD simulations
    Yao, Zhipeng
    Chen, Caixia
    Wang, Teng
    Xia, Zihong
    Zhao, Luhaibo
    Tang, Zhiyong
    Yan, Shuai
    CHEMICAL ENGINEERING JOURNAL, 2025, 504
12345