EFFECTS OF PARTICULATE MATTER EMISSIONS OF DIESEL ENGINE USING DIESEL-METHANOL BLENDS

被引:21
作者
Yusop, A. F. [1 ,2 ]
Mamat, R. [1 ,2 ]
Yasin, M. H. Mat [1 ,2 ]
Ali, Obeed M. [1 ]
机构
[1] Univ Malaysia Pahang, Fac Mech Engn, Pekan PEKAN, Pahang, Malaysia
[2] Univ Malaysia Pahang, Automot Engn Ctr, Pekan 26600, Pahang, Malaysia
关键词
Particulate matter; diesel engine; soluble organic fraction; dry soot; PME; methanol;
D O I
10.15282/jmes.6.2014.22.0092
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this work, palm methyl ester (PME) was added to methanol-biodiesel fuel in order to reduce the emissions. For diesel engines, alcohols are receiving increasing attention because they are oxygenated and renewable fuels. Therefore, in this study, the effect of the PM emission level of a four-cylinder, naturally aspirated, indirect injection diesel engine has been experimentally investigated by using methanol-blended diesel fuel from 0% to 20% with an increment of 5%. The effects of methanol on particulate matter (Laurens, Koolwijk, & De Maat) components, soluble organic fraction (SOF) and dry soot (DS) using different types of fuel blend were investigated. Using a composite filter, the ester-methanol-diesel characteristics such as mass concentration in terms of PM, SOF and DS were analyzed under different engine operating conditions. The results show that the combination of 10% of methanol with 20% of palm methyl ester produces lower PM emissions. It is shown that PME20M10 of methanol-biodiesel fuel can reduce the PM emissions effectively for all load conditions.
引用
收藏
页码:959 / 967
页数:9
相关论文
共 50 条
[21]   Particulate Matter Chemical Characteristics from a Light-Duty Diesel Engine Fueled with PODE/Diesel Blends [J].
Meng, Xin ;
Tian, Jing ;
Liu, Shuai ;
Li, Ruina ;
Sun, Jian ;
Liu, Wenjun .
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2023, 24 (03) :669-679
[22]   Carbon particulate matter incineration in diesel engine emissions using indirect nonthermal plasma processing [J].
Okubo, Masaaki ;
Arita, Naoki ;
Kuroki, Tomoyuki ;
Yamamoto, Toshiaki .
THIN SOLID FILMS, 2007, 515 (09) :4289-4295
[23]   Modelling soot emission from a direct injection diesel engine fuelled with diesel-methanol dual fuel [J].
Song, Jinou ;
Yao, Chunde ;
Liu, Yike ;
Wang, Hongfu .
COMBUSTION THEORY AND MODELLING, 2008, 12 (05) :999-1007
[24]   Combustion performance and pollutant emissions analysis using diesel/gasoline/iso-butanol blends in a diesel engine [J].
Wei, Mingrui ;
Li, Song ;
Xiao, Helin ;
Guo, Guanlun .
ENERGY CONVERSION AND MANAGEMENT, 2017, 149 :381-391
[25]   Study on particulate matter (PM) emissions of diesel engine using Palm Oil Methyl Ester [J].
Jaharudin, Nur Fauziah ;
Abdullah, Abdul Adam ;
Yusop, Ahmad Fitri ;
Mamat, Rizalman ;
Ramlan, Nur Atiqah ;
Hamzah, Mohd Herzwan .
4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 :433-+
[26]   Study on the influence of methanol on the precursor of soot and particulate matter of diesel engine fueled with F-T diesel [J].
Li, Ruina ;
Liu, Qingcheng ;
Yang, Dahai ;
Zhu, Jialong ;
Li, Xuwen ;
Yue, Hua ;
Meng, Yang .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2025, 47 (01) :11891-11910
[27]   Effect of Calophyllum Inophyllum biodiesel-diesel blends on combustion, performance, exhaust particulate matter and gaseous emissions in a multi-cylinder diesel engine [J].
How, H. G. ;
Masjuki, H. H. ;
Kalam, M. A. ;
Teoh, Y. H. ;
Chuah, H. G. .
FUEL, 2018, 227 :154-164
[28]   Effects of PODE/diesel blends on particulate matter emission and particle oxidation characteristics of a common-rail diesel engine [J].
Liu, Junheng ;
Liu, Zengguang ;
Wang, Lejian ;
Wang, Pan ;
Sun, Ping ;
Ma, Hongjie ;
Wu, Pengcheng .
FUEL PROCESSING TECHNOLOGY, 2021, 212
[29]   Development of the Particulate Matter Sensor for Diesel Engine [J].
Dong Gu Kim ;
Sang Hyeok Yang ;
Hyun Soo Kim .
International Journal of Automotive Technology, 2019, 20 :359-364
[30]   Development of the Particulate Matter Sensor for Diesel Engine [J].
Kim, Dong Gu ;
Yang, Sang Hyeok ;
Kim, Hyun Soo .
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2019, 20 (02) :359-364