SIMPLIFIED NDE OF A CLOSED VERTICAL CRACK USING ULTRASONICS

被引:21
作者
SAKA, M
UCHIKAWA, T
机构
[1] Department of Mechanical Engineering, Tohoku University, Sendai
关键词
CLOSED CRACK; ULTRASONIC INSPECTION; INVERSE PROBLEM;
D O I
10.1016/0963-8695(95)00029-W
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Ultrasonic testing using a normally incident longitudinal wave is used for sizing a closed crack. The crack exists vertically on the back-wall of the inspected plate. in order to evaluate the closed crack, the relationship between the first back-wall echo height and the crack depth for an open crack as the basis for evaluating the closed crack is determined experimentally and is introduced to the analysis of echo height for the closed crack. The unknown parameters in the evaluation of the closed crack, such as crack depth and the stress closing the crack, are determined by comparing the first back-wall echo height obtained through both analysis and experiment on the closed crack.
引用
收藏
页码:289 / 296
页数:8
相关论文
共 17 条
[1]  
Buck O., 1982, Review of Progress in Quantitative Nondestructive Evaluation. Vol.1. Proceedings of the Eighth Air Force/Defense Advanced Research Projects Agency Symposium on Quantitative Nondestructive Evaluation, P349
[2]  
Buck O., 1984, Journal of Nondestructive Evaluation, V4, P203, DOI 10.1007/BF00566225
[3]  
Buck O., 1983, REV PROGR QUANTITATI, V2A, P345
[4]  
BUCK O, 1982, ADV CRACK LENGTH MEA, P413
[5]  
CLARK R, 1987, NDT INT, V20, P269, DOI 10.1016/0308-9126(87)90444-5
[6]   CRACK HEIGHT MEASUREMENT - AN EVALUATION OF THE ACCURACY OF ULTRASONIC TIMING METHODS [J].
DATE, K ;
SHIMADA, H ;
IKENAGA, N .
NDT INTERNATIONAL, 1982, 15 (06) :315-319
[7]  
Golan S., 1980, Journal of Nondestructive Evaluation, V1, P11, DOI 10.1007/BF00566228
[8]  
Hudgell R. J., 1974, British Journal of Non-Destructive Testing, V16, P144
[9]  
Saka M., 1989, Research in Nondestructive Evaluation, V1, P65, DOI 10.1080/09349848909409467
[10]   NDT OF CLOSED CRACKS BY ULTRASONIC PROPAGATION ALONG THE CRACK SURFACE [J].
SAKA, M ;
FUKUDA, Y .
NDT & E INTERNATIONAL, 1991, 24 (04) :191-194