PARTIAL MINING IN THE SAFETY PILLARS FOR THE SHAFTS OF THE MINE "JAS-MOS"

被引:0
|
作者
Holeksa, Augustyn
Chmiel, Piotr
Lubryka, Mieczyslaw
Sliwinski, Jerzy
机构
来源
MINING OF MINERAL DEPOSITS | 2007年 / 1卷
关键词
D O I
暂无
中图分类号
TD [矿业工程];
学科分类号
0819 ;
摘要
The mining of stone coal strata causes tension and deformation stresses in the massif of orogen and in this connection some deformations of the area and of the shaft tube, too. To protect theses objects from being damaged safety pillars are set up. A safety pillar is a part of orogen under a protected object in the shape of a truncated cone (and with an angle of Psi dependent on the category of resistance of the object) which is mined on a limited scale. The pillar contains some coal resources which are difficult to excavate. The term of safety pillar was established decades ago and it fulfilled its role in the so called "shallow mining". In the case of deep mining of today already considerable resources are contained in the safety pillar which are very valuable because of their near situation and very high geological knowledge. The authors of the paper present on the grounds of observations and geodetic measurements carried out in three mines working coal strata at the depth below 400 m, in which, in different degree, the bounds of safety pillars of the pit shafts have been disturbed and on the grounds of numeric calculation verifying the measurements a new shape of safety pillar for the pit shaft (having a bulgy shape and not that of a truncated cone) making it possible to win back a part of resources disturbing the stability of pit shaft tube. This doesn't require additional investment costs and assures an unmenaced functioning of the pit shaft. New computer techniques and their turbulent development in the recent years have made it possible to build a theoretical model of the orogen possessing variable geo-mechanical parameters and a high degree of complication. Numerical calculations carried out on its basis make it possible to "observe" any phenomena occurring in the orogen, their interpretation and comparison with geodetic measurements in a reality-near way. The paper presents the process of modelling a lot of variants of the orogen being different in their properties and containing mining excavations; a pit shaft and an output wall in many configurations It also presents maps of distribution of partial stresses in the whole volume of modelled orogen formed on the grounds of numeric calculations. A graphic visualization of modelled orogens and maps of distribution of partial stresses during the presentation of the paper increase the attractiveness of the topic, which enables the audience to understand, in an easy way, the geo-mechanical phenomena occurring in the orogen close to protected pit shaft. Making use of the above conditions in he Stone Coal Mine "JAS-MOS" in Jastrzebie Zdroj a way of mining the region of safety pillar "JAS-V" was designed, which allows, thanks to elongation of he course of the walls, to additionally win about 775 thousand tons, which makes 3,5 output of the mine a month.
引用
收藏
页码:185 / 193
页数:9
相关论文
共 50 条
  • [1] The impact of the exploitation of "Jas-Mos" coal mine on the route of A-1 motorway
    Holeksa, Augustyn
    Lubryka, Mieczyslaw
    Majchrzak, Jerzy
    Sliwinski, Jerzy
    GOSPODARKA SUROWCAMI MINERALNYMI-MINERAL RESOURCES MANAGEMENT, 2008, 24 (03): : 87 - 96
  • [2] Safety devices for mine shafts
    Kudlich, R
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1923, 68 : 206 - 215
  • [3] Fireproofing mine shafts of Anaconda Copper Mining Co
    Norris, EM
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1920, 61 : 201 - 203
  • [4] NEW DEVELOPMENTS IN THE MINING OF UNDERGROUND PILLARS AT THOMPSON MINE
    STEWART, G
    MACLEAN, R
    CIM BULLETIN, 1988, 81 (918): : 54 - 58
  • [5] Safety Aspects Related to Vibrational Diagnostics of Deep Mine Shafts
    Kompala, Janusz
    Motyka, Zbigniew
    Passia, Henryk
    Szade, Adam
    Swider, Janusz
    9TH INTERNATIONAL CONFERENCE ON VIBRATION MEASUREMENTS BY LASER AND NONCONTACT TECHNIQUES AND SHORT COURSE, 2010, 1253 : 133 - 139
  • [6] Exploitation of developed coal mine pillars by shortwall mining - a case example
    Kushwaha, A
    Banerjee, G
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2005, 42 (01) : 127 - 136
  • [7] OPTIMIZATION OF PROTECTIVE PILLARS PARAMETERS OF MINE SHAFTS AT THE ORE MINES OF OJS']JSC "MMK "NORILSK NICKEL"
    Zuev, Yu. I.
    Zelentsov, S. N.
    Kuznetsova, E. I.
    Zvezdkin, V. A.
    Karelin, V. N.
    JOURNAL OF MINING INSTITUTE, 2012, 198 : 7 - 10
  • [8] Aspects of Mine Safety in the Chinese Mining Industry
    Aspekte der Grubensicherheit im chinesischen Steinkohlenbergbau
    Bai, F., 1600, Verlag Glueckauf GmbH (140):
  • [9] Delimiting of Safety Pillars to Separate Multi-layer Thick-seam Mining Systems from an Aquifer in an Adjacent Flooded Mine
    Kubica, Janusz
    Bukowski, Przemyslaw
    Gzyl, Grzegorz
    MINE WATER AND THE ENVIRONMENT, PROCEEDINGS, 2008, : 23 - 26
  • [10] DETERMINATION OF THE OPTIMAL TEMPERATURE REGIME ACCORDING TO THE SAFETY CONDITIONS OF THE POTASH MINE SHAFTS
    Harin, D. K.
    Ivanov, O. V.
    Grishin, E. L.
    PROCEEDINGS OF THE TULA STATES UNIVERSITY-SCIENCES OF EARTH, 2024, 4 : 714 - 722