THE PHENOMENON OF DURABILITY VARIABLE DIES FOR ALUMINUM EXTRUSION PROFILES

被引：0
作者：
Borowski, J. [1 ]
Wendland, J. [1 ]
机构：
[1] Met Forming Inst, Poznan, Poland
来源：
METALURGIJA | 2016年 / 55卷 / 02期
关键词：
aluminium; extrusion; nitriding; die; wear;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Extrusion dies are usually regenerated several times (min 4 times). The phenomenon of extended life after each regenerative nitriding process has not been explained. In this work, the regeneration process of dies used in the extrusion of aluminium profiles has been presented. In the article, it was sought to explain the cause of increased die durability after the third or fourth nitriding. Also in this work is presented an analysis of the influence of the parameters of gas nitriding with the ZeroFlow method on hardness of dies. Results were verified under industrial conditions at extrusion company, comparing the durability of the dies nitrided with the ZeroFlow method with so-far-used dies nitrided in the commercial way. An increase of the dies durability was achieved after a single ZeroFlow nitriding.
引用
收藏
页码：229 / 232
页数：4
相关论文
共 50 条
  • [1] Finite volume simulation in porthole dies extrusion of aluminum profiles
    Cheng, Lei
    Xie, Shuisheng
    He, Youfeng
    Huang, Guojie
    Fu, Yao
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 290 - 296
  • [2] POSSIBILITIES TO INCREASE THE DURABILITY OF THE ACTIVE PLATES OF THE EXTRUSION DIES
    Inoan, Cristian-Ioan
    Corches, Radu-Nicolae
    Achimas, Gheorghe
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2020, 63 (03): : 321 - 330
  • [3] Variable-shape extrusion of aluminum square pipes using DLC coated dies
    Hara, K
    Ohtake, N
    Horita, K
    Yamagata, A
    NEW DIAMOND AND FRONTIER CARBON TECHNOLOGY, 2004, 14 (06): : 331 - 340
  • [4] Influence of Operating Temperature on the Service Life of Aluminum Extrusion Dies
    Hubicki, Rafal
    Richert, Maria
    Lebkowski, Piotr
    MATERIALS, 2022, 15 (19)
  • [5] Optimization of bearing lengths in aluminum extrusion dies
    Mayavaram, R.
    Sajja, U.
    Secli, C.
    Niranjan, S.
    EIGHTH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 2013, 12 : 276 - 281
  • [6] The effect of pocket shape in extrusion dies
    L. Donati
    L. Tomesani
    M. Shikorra
    International Journal of Material Forming, 2009, 2
  • [7] THE EFFECT OF POCKET SHAPE IN EXTRUSION DIES
    Donati, L.
    Tomesani, L.
    Shikorra, M.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 97 - 100
  • [8] Numerical Analysis of Aluminum Alloys Extrusion Through Porthole Dies
    Zasadzinski, J.
    Rekas, A.
    Libura, W.
    Richert, J.
    Lesniak, D.
    ADVANCES ON HOT EXTRUSION AND SIMULATION OF LIGHT ALLOYS, 2010, 424 : 105 - 111
  • [9] Reducing the Surface Degradation of Aluminum Extrusion Dies During Preheating
    Paul Stratton
    Journal of Materials Engineering and Performance, 2010, 19 : 623 - 626
  • [10] Extrusion of Profiles with Variable Wall Thickness
    Selvaggio, A.
    Haase, M.
    Ben Khalifa, N.
    Tekkaya, A. E.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MANUFACTURING OF LIGHTWEIGHT COMPONENTS: MANULIGHT 2014, 2014, 18 : 15 - 20
12345