BATCH-FABRICATED SILICON ACCELEROMETER

被引：313

作者：

ROYLANCE, LM

ANGELL, JB

机构：

[1] STANFORD UNIV,INTEGRATED CIRCUITS LAB,STANFORD,CA 94305

[2] STANFORD UNIV,DEPT ELECT ENGN,STANFORD,CA 94305

来源：

IEEE TRANSACTIONS ON ELECTRON DEVICES | 1979年 / 26卷 / 12期

关键词：

D O I：

10.1109/T-ED.1979.19795

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

An extremely small batch-fabricatable accelerometer has been developed using silicon IC technology. The device, 3 mm long and weighing 0.02 g, is a simple cantilevered beam and mass structure sealed into a silicon and glass package. The fabrication of the accelerometer is described, and the theory behind its operation developed. Experimental results on sensitivity, frequency response, and linearity are presented and found to agree with theory. The accelerometer is capable of measuring accelerations from 0.001 to 50 g over a 100-Hz bandwidth, while readily implemented geometry changes allow these performance characteristics to be varied over a wide range to meet the needs of differing applications. Copyright © 1979 by The Institute of Electrical and Electronics Engineers, Inc.

引用

页码：1911 / 1917

页数：7

共 50 条

[21] Batch-fabricated high-performance graphene Hall elements [J].

Xu, Huilong ;

Zhang, Zhiyong ;

Shi, Runbo ;

Liu, Honggang ;

Wang, Zhenxing ;

Wang, Sheng ;

Peng, Lian-Mao .

SCIENTIFIC REPORTS, 2013, 3

[22] BATCH-FABRICATED THIN-FILM MAGNETIC RECORDING HEADS [J].

ROMANKIW, LT ;

CROLL, IM ;

HATZAKIS, M .

IEEE TRANSACTIONS ON MAGNETICS, 1970, MAG6 (03) :597-&

[23] Batch-fabricated microinductors with electroplated magnetically anisotropic and laminated alloy cores [J].

Park, JY ;

Han, SH ;

Allen, MG .

IEEE TRANSACTIONS ON MAGNETICS, 1999, 35 (05) :4291-4300

[24] Batch-fabricated high-performance graphene Hall elements [J].

Huilong Xu ;

Zhiyong Zhang ;

Runbo Shi ;

Honggang Liu ;

Zhenxing Wang ;

Sheng Wang ;

Lian-Mao Peng .

Scientific Reports, 3

[25] Batch-fabricated high dense multi sliders for WDM spectral attenuation [J].

Konishi, S ;

Oshima, A ;

Kinoshita, N ;

Kumagaya, I ;

Kishi, T ;

Shimazu, T ;

Katayama, M .

TRANSDUCERS '05, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2005, :1242-1245

[26] Characterization of small-scale batch-fabricated carbon nanofiber probes [J].

Kitazawa, M. ;

Ohta, R. ;

Sugita, Y. ;

Tanaka, J. ;

Tanemura, M. .

PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY, 2008, 100

[27] A Batch-Fabricated Single-Layer Elastomeric Actuator With Corrugated Surface [J].

Maleki, Teimour ;

Chitnis, Girish ;

Kim, Albert ;

Ziaie, Babak .

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2012, 21 (04) :859-866

[28] Batch-fabricated microinductors with electroplated magnetically anisotropic and laminated alloy cores [J].

Park, Jae Yeong ;

Han, Suk H. ;

Allen, Mark G. .

IEEE Transactions on Magnetics, 1999, 35 (5 pt 3) :4291-4300

[29] 4.8 MHZ AFM NANOPROBES WITH CAPACITIVE TRANSDUCERS AND BATCH-FABRICATED NANOTIPS [J].

Walter, B. ;

Faucher, M. ;

Mairiaux, E. ;

Xiong, Z. ;

Buchaillot, L. ;

Legrand, B. .

2011 IEEE 24TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2011, :517-520

[30] Scanning thermal microscopy of carbon nanotubes using batch-fabricated probes [J].

Shi, L ;

Plyasunov, S ;

Bachtold, A ;

McEuen, PL ;

Majumdar, A .

APPLIED PHYSICS LETTERS, 2000, 77 (26) :4295-4297

← 1 2 3 4 5 →