Structure and performance of welding joint of Q235 steel welded by SHS welding

被引：7

作者：

Hu, Junzhi ^{[1
]}

Wang, Sumei ^{[1
]}

Zhao, Xiaoli ^{[1
]}

Zhu, Shilin ^{[1
]}

Yu, Botao ^{[1
]}

机构：

[1] China Power Complete Equipment Co Ltd, Beijing 100011, Peoples R China

来源：

FRONTIERS OF MECHANICAL ENGINEERING | 2010年 / 5卷 / 02期

关键词：

self-propagating high-temperature synthesis (SHS) welding; welding line; structure and performance; melting;

D O I：

10.1007/s11465-010-0003-3

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A self-propagating high-temperature synthesis (SHS) welding-pen that can weld steel workpiece from 6 to 10 mm is developed and welds the Q235 steel. The structure and properties of the welding joint are studied. The result indicates that this type of welding is melting and the fusion zone is clear. The tensile-strength of the welding joint is 283 MPa, flexural strength is 628 MPa, impact toughness is 46.43 J.cm(-2), and the microhardness of the welding joint and fusion zone are 230 HV0.1 and 255.6HV(0.1), respectively. The mircohardness of the fusion zone and the welding line are higher than that of the matrix.

引用

页码：189 / 193

页数：5

共 5 条

[1]

[胡军志 HU Junzhi], 2007, [材料热处理学报, Transactions of materials and heat treatment], V28, P81

[2]

[胡军志 HU Junzhi], 2006, [焊接学报, Transactions of the China Welding Institution], V27, P94

[3] Joining of SiC ceramic to Ni-based superalloy with Cu intermediate layer [J].

Li, SJ ;

Liang, XB ;

Duan, HP ;

Zang, XM ;

Zhang, Y .

PROGRESS IN SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS, 2002, 217 :101-109

[4]

MERZHANOV AG, 1990, COMBUSTION PLASMA SY, P1

[5]

Shi Y W, 2006, CHINA MAT ENG CEREMO, V22

← 1 →