ROLE OF SHOT-PEENING ON HYDROGEN EMBRITTLEMENT OF A LOW-CARBON STEEL AND A 304 STAINLESS-STEEL

被引：29
作者：
BRASS, AM
CHENE, J
ANTERI, G
OVEJEROGARCIA, J
CASTEX, L
机构：
[1] CONEA,DEPT MAT,RA-1429 BUENOS AIRES,ARGENTINA
[2] ENSAM,LM 3,F-13617 AIX EN PROVENCE,FRANCE
来源：
JOURNAL OF MATERIALS SCIENCE | 1991年 / 26卷 / 16期
关键词：
D O I：
10.1007/BF00543675
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Shot-peening surface treatments were performed on a low-carbon steel and a 304 stainless steel. The influence of residual stresses on hydrogen permeation and distribution was investigated. The results were correlated with the tensile properties measured in air after cathodic charging and in a NACE medium under slow load-rate straining. The role of shot-peening on the hydrogen embrittlement of the low-carbon steel is strongly dependent on the severity of the hydrogen environment and testing conditions. The detrimental effect of shot-peening on the hydrogen embrittlement of the stainless steel is related to phase transformations induced by cold work.
引用
收藏
页码：4517 / 4526
页数：10
相关论文
共 23 条
[1]   EFFECT OF ION-IMPLANTATION ON CORROSION BEHAVIOR OF PURE IRON .4. LEAD ION-IMPLANTATION [J].
ASHWORTH, V ;
GRANT, WA ;
PROCTER, RPM ;
WRIGHT, EJ .
CORROSION SCIENCE, 1978, 18 (08) :681-685
[2]  
AUDISIO S, 1987, TRAITEMENT SURFACE P
[3]  
BOCKRIS JOM, 1971, ACTA METALL MATER, V19, P1209, DOI 10.1016/0001-6160(71)90054-X
[4]   INFLUENCE OF NITROGEN ION-IMPLANTATION ON HYDROGEN PERMEATION IN AN EXTRA MILD-STEEL [J].
BRASS, AM ;
CHENE, J ;
PIVIN, JC .
JOURNAL OF MATERIALS SCIENCE, 1989, 24 (05) :1693-1699
[5]   SULFIDE STRESS CRACKING OF HIGH-STRENGTH MODIFIED CR-MO STEELS [J].
CHARBONNIER, JC ;
MARGOTMARETTE, H ;
BRASS, AM ;
AUCOUTURIER, M .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (05) :935-944
[6]  
CHENE J, 1977, MET CORROS-IND, V623, P262
[7]  
CHENE J, 1982, ASM PUBLICATION, V263
[8]  
CHENE J, 1977, MET CORROS-IND, V625, P291
[9]  
de Kazinczy F, 1955, JERNKONT ANN, V139, P885
[10]  
Draper C. W., 1985, International Metals Reviews, V30, P85
123