Investigation on the Joinability of Al 6061 Al-Alloy Plates with Friction Stir Welding

被引：0
|
作者：
Eker, Ilker [1 ]
Sevim, Ibrahim [2 ]
机构：
[1] Cukurova Makine Imalat & Ticaret AS, TR-33460 Tarsus, Mersin, Turkey
[2] Mersin Univ, Muhendislik Fak, Makine Muhendisligi Bolumu, TR-33343 Ciftlikkoy, Mersin, Turkey
来源：
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI | 2009年 / 15卷 / 02期
关键词：
Aluminum alloys; Friction stir welding; Overlap welding;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, the microhardness and mechanical properties of welding zones of cast aluminum sheets welded by friction stir welding method have been examined with variable parameters. During welding, rotational speed of the welding stir tool and welding speed were chosen as the variable parameters. A welding tool made of case hardened steel (material number being SAE 8620) was employed in the welding of aluminum plates. Four different welding speeds are considered at constant rotational speed of the mixer tip. Influence of process parameters were investigated by metallographic studies and mechanical tests.
引用
收藏
页码：137 / 141
页数：5
相关论文
共 50 条
  • [1] Investigation into the effect of temper condition on friction stir weldability of AA6061 Al-alloy plates
    Ipekoglu, G.
    Erim, S.
    Kiral, B. Goren
    Cam, G.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2013, 51 (03): : 155 - 163
  • [2] Friction Stir Spot Welding Phenomena in Al Alloy 6061
    Sato, Yutaka S.
    Fujimoto, Mitsuo
    Abe, Natsumi
    Kokawa, Hiroyuki
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 1243 - +
  • [3] Effect of the rotational speed of on the surface quality of 6061 Al-alloy welded joint using friction stir welding
    Feng, T. T.
    Zhang, X. H.
    Fan, G. J.
    Xu, L. F.
    2017 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2017), 2017, 213
  • [4] Friction stir welding of Al2O3 particulate 6061 Al alloy composite
    Nakata, K
    Inoki, S
    Nagano, Y
    Ushio, M
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 2873 - 2878
  • [5] Prepration and Mechanical Properties of Ultrafine-grained 6061 Al-alloy by Friction Stir Process
    Wang B.
    Liu Y.
    Xue P.
    Ni D.
    Xiao B.
    Ma Z.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2021, 35 (05): : 321 - 329
  • [6] INVESTIGATION OF THE EFFECT OF TEMPER CONDITION ON THE FRICTION-STIR WELDABILITY OF AA7075 Al-ALLOY PLATES
    Ipekoglu, Guven
    Kiral, Binnur Goren
    Erim, Secil
    Cam, Gurel
    MATERIALI IN TEHNOLOGIJE, 2012, 46 (06): : 627 - 632
  • [7] FRICTION STIR WELDING OF AL 6082 ALLOY
    Cojocaru, Radu
    Dehelean, Dorin
    Gabor, Ramona
    Ciuca, Cristian
    Zupanc, Uros
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 - NEW FACE OF TMCR, 2009, : 191 - 194
  • [8] Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions
    Güven İpekoğlu
    Seçil Erim
    Gürel Çam
    Metallurgical and Materials Transactions A, 2014, 45 : 864 - 877
  • [9] Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions
    Ipekoglu, Guven
    Erim, Secil
    Cam, Gurel
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (02): : 864 - 877
  • [10] Friction stir welding of 7055 Al alloy
    Lee, CY
    Lee, WB
    Yeon, YM
    Jung, SB
    PROCEEDINGS OF THE FIFTEENTH (2005) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 2005, : 52 - 55
12345