Performance Assessment of Physico-Mechanical Properties of Aloji Fireclay Brick

被引：0

作者：

Ajala, Amkpa Job ^{[1
]}

Badarulzaman, Nur Azam ^{[2
]}

机构：

[1] Fed Polytech Idah, PMB 1037, Idah, Kogi State, Nigeria

[2] Univ Tun Hussein Onn Malaysia, Fac Mech & Mfg Engn, Parit Raja, Malaysia

来源：

INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2016年 / 8卷 / 02期

关键词：

Mechanical strength; Sintering temperature; Production; Fireclay brick;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This research evaluated the physical and mechanical properties of Aloji fireclay brick's suitability for production of refractory fireclay brick as furnace linings. At the optimum sintering temperature of 1200 degrees C, the Aloji fireclay brick had apparent porosity value of 23.62 %, bulk density was 1.76 g/cm(3), firing shrinkage value of 8.62 %, water absorption of 7.77 % and CCS was 15.8 MPa. It was observed that, as the sintering temperatures increased the porosity, bulk density, firing shrinkage and the CCS were linearly increased. It can be concluded that various sintering temperatures have significant influence on the physical and mechanical properties of the Aloji fireclay brick.

引用

页数：3