INFLUENCE OF PARTICLE ORIENTATION ON THE EFFECTIVE ELECTRICAL RESISTANCE AND OHMIC HEATING RATE OF A LIQUID-PARTICLE MIXTURE

被引:117
|
作者
Sastry, Sudhir K. [1 ]
Palaniappan, Sevugan [1 ]
机构
[1] Ohio State Univ, Dept Agr Engn, Columbus, OH 43210 USA
关键词
D O I
10.1111/j.1745-4530.1992.tb00153.x
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The ohmic heating rate of a liquid-particle mixture is expected to depend on particle orientation. A mathematical model was developed to determine the extent of orientation dependence for the case of a cubic particle. The particle and liquid resistances were determined by taking incremental sections through the particle and using the electrical conductivity to calculate the effective resistance. Modeling and experimental results indicate that for a cubic particle, orientation effects are slight; both with regard to effective resistance and heating time. However, this result is not expected to apply to particles of large aspect ratios.
引用
收藏
页码:213 / 227
页数:15
相关论文
共 37 条
  • [31] INFLUENCE OF GRANULATION LIQUID FLOW-RATE ON PARTICLE-SIZE DISTRIBUTION IN SPRAY-GRANULATED PRODUCTS
    MEHTA, A
    ADAMS, K
    ZOGLIO, MA
    CARSTENSEN, JT
    JOURNAL OF PHARMACEUTICAL SCIENCES, 1977, 66 (10) : 1462 - 1464
  • [32] Influence of the Strain Rate, Particle Size, and Equivalence Ratio on the Combustion of the Premixed Air-Aluminum Microparticle Mixture with a Counterflow Structure
    Pourmohammad, Ya.
    Sabzpooshani, M.
    COMBUSTION EXPLOSION AND SHOCK WAVES, 2018, 54 (06) : 681 - 688
  • [33] Experimental analysis of micro-cavity influence on the effective solar absorptance of white sand curtain on porous obstructions of particle heating receivers
    Saeed, Rageh
    Alaqel, Shaker
    Djajadiwinata, Eldwin
    Saleh, Nader S.
    Alswaiyd, Abdulelah
    Al-Ansary, Hany
    Danish, Syed Noman
    El-Leathy, Abdelrahman
    Al-Suhaibani, Zeyad
    Jeter, Sheldon
    Almuzaiqer, Redhwan
    Almutairi, Zeyad
    CASE STUDIES IN THERMAL ENGINEERING, 2025, 66
  • [34] INFLUENCE OF SAMPLE PARTICLE-SIZE AND HEATING RATE ON THE THERMAL-DECOMPOSITION OF K2C2O4
    MULOKOZI, M
    LUGWISHA, E
    JOURNAL OF THERMAL ANALYSIS, 1991, 37 (03): : 583 - 596
  • [35] Pyrolysis of chromated copper arsenate (CCA) treated wood waste at elevated pressure: Influence of particle size, heating rate, residence time, temperature and pressure
    Cuypers, F.
    Helsen, L.
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2011, 92 (01) : 111 - 122
  • [36] Molecular dynamics study of temperature and heating rate–dependent sintering of titanium nanoparticles and its influence on the sequent tension tests of the formed particle-chain products
    Jungmin Jeon
    Shan Jiang
    Farzin Rahmani
    Sasan Nouranian
    Journal of Nanoparticle Research, 2020, 22
  • [37] Molecular dynamics study of temperature and heating rate-dependent sintering of titanium nanoparticles and its influence on the sequent tension tests of the formed particle-chain products
    Jeon, Jungmin
    Jiang, Shan
    Rahmani, Farzin
    Nouranian, Sasan
    JOURNAL OF NANOPARTICLE RESEARCH, 2020, 22 (01)