INFLUENCE OF PARTICLE ORIENTATION ON THE EFFECTIVE ELECTRICAL RESISTANCE AND OHMIC HEATING RATE OF A LIQUID-PARTICLE MIXTURE

被引：117
|
作者：
Sastry, Sudhir K. [1 ]
Palaniappan, Sevugan [1 ]
机构：
[1] Ohio State Univ, Dept Agr Engn, Columbus, OH 43210 USA
来源：
JOURNAL OF FOOD PROCESS ENGINEERING | 1992年 / 15卷 / 03期
关键词：
D O I：
10.1111/j.1745-4530.1992.tb00153.x
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The ohmic heating rate of a liquid-particle mixture is expected to depend on particle orientation. A mathematical model was developed to determine the extent of orientation dependence for the case of a cubic particle. The particle and liquid resistances were determined by taking incremental sections through the particle and using the electrical conductivity to calculate the effective resistance. Modeling and experimental results indicate that for a cubic particle, orientation effects are slight; both with regard to effective resistance and heating time. However, this result is not expected to apply to particles of large aspect ratios.
引用
收藏
页码：213 / 227
页数：15
相关论文
共 37 条
  • [21] THE INFLUENCE OF LANCE ORIENTATION AND GAS EVOLUTION ON PARTICLE LIQUID CONTACT DURING SUBMERGED POWDER INJECTION
    IRONS, GA
    FARIAS, LR
    CANADIAN METALLURGICAL QUARTERLY, 1986, 25 (04) : 297 - 306
  • [22] Synthesis of iron oxide nanoparticles by decomposition of iron-oleate: influence of the heating rate on the particle size
    Ullrich, Aladin
    Rahman, Mohammad Mostafizar
    Azhar, Ahmed
    Kuehn, Michael
    Albrecht, Manfred
    JOURNAL OF NANOPARTICLE RESEARCH, 2022, 24 (09)
  • [23] Synthesis of iron oxide nanoparticles by decomposition of iron-oleate: influence of the heating rate on the particle size
    Aladin Ullrich
    Mohammad Mostafizar Rahman
    Ahmed Azhar
    Michael Kühn
    Manfred Albrecht
    Journal of Nanoparticle Research, 2022, 24
  • [24] Influence of refractory particle size on sintering of electrical contacts with high volume fraction of liquid phase
    Furukawa, E
    Bernardini, PAN
    Marcondes, PVP
    Azuma, EM
    ADVANCED POWDER TECHNOLOGY, 1999, 299-3 : 263 - 270
  • [25] An electrical conductivity based method of determining the particle deposition rate in air-liquid interface devices
    Wiegand, Harald
    Meyer, Joerg
    Kasper, Gerhard
    TOXICOLOGY IN VITRO, 2015, 29 (05) : 1100 - 1106
  • [26] Comparative evaluation of electrical resistance tomography, positron emission particle tracking and high-speed imaging for analysing horizontal particle-liquid flow in a pipe
    Savari, Chiya
    Li, Kun
    Barigou, Mostafa
    POWDER TECHNOLOGY, 2024, 438
  • [27] Comparative evaluation of electrical resistance tomography, positron emission particle tracking and high-speed imaging for analysing horizontal particle-liquid flow in a pipe
    Savari, Chiya
    Li, Kun
    Barigou, Mostafa
    Powder Technology, 2024, 438
  • [28] An Effective Reaction Rate Model for Gas-Solid Reactions with High Intra-Particle Diffusion Resistance
    Yang, Wei
    Cloete, Schalk
    Morud, John
    Amini, Shahriar
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2016, 14 (01) : 331 - 342
  • [29] Influence of the Strain Rate, Particle Size, and Equivalence Ratio on the Combustion of the Premixed Air–Aluminum Microparticle Mixture with a Counterflow Structure
    Ya. Pourmohammad
    M. Sabzpooshani
    Combustion, Explosion, and Shock Waves, 2018, 54 : 681 - 688
  • [30] Simulation of the influence of particle size distribution and grain boundary resistance on the electrical response of 2D polycrystals
    Morata, A
    Dezanneau, G
    Tarancón, A
    Peiró, F
    Morante, JR
    2005 SPANISH CONFERENCE ON ELECTRON DEVICES, PROCEEDINGS, 2005, : 225 - 228
1234