The generation of ultrasonic wave modes in thin-walled metal tubing has been investigated experimentally using piezoelectric ultrasonic probes. It is shown that the L(0, 1) mode, which is comparable to the A0 Lamb wave mode in flat plate, can be generated with acceptable efficiency. The L(0, 2) mode (compare the S0 Lamb wave mode) is generated rather less efficiently, while its greater group velocity tends to enhance the resolution problems so caused. The initial probe designs were inefficient in that a considerable amount of ultrasonic 'noise' was also present which could mask ultrasonic pulses of interest. This would be especially so for short range operation. An improved probe design reduced this background noise to a more acceptable level. The propagation of the L(0, 1) mode around a length of bent (U-form) tubing has also been investigated and it is shown that the ultrasonic pulse is both attenuated and lengthened, while structure has also been introduced. The theoretical implications of this are discussed. Finally a small amount of work is presented on the interaction of both modes with artificial defects. © 1979.
