HEAT-TRANSFER IN A CONDUCTIVE-HEATING AGITATED DRYER

The heat transfers between the heating plane and the granular materials in both the ''Stationary heating-plane type'' and the ''Moving heating-plane type'' of the conductive-heating agitated dryers were discussed mainly from the view point of the scale-up of the dryer. Under the condition of complete mixing in the bed of bulk materials, the heat transfer models proposed for both the two types of dryers can predict the heat transfer coefficients in any sizes of the dryers. However, the complete mixing is not usually accomplished in the large scale of dryer. Hence, an ''Incomplete mixing model'' was proposed to estimate the effect of the incompleteness of mixing on the heat transfer coefficient. In this model, the incompleteness of mixing can be apparently taken into consideration only by increasing the contact time.